Digifly FMS 200
Digifly FMS 200 Functions
The strength of the FMS 200 system is the screen!
The FMS 200 display has 30% more information than it's predecessor while still maintaining the same standard dimensions of 6.25". The brightness and wide viewing angles allow excellent usability, while weight and energy requirements are still kept to a minimum. On a single screen you can view all required flight data from three different display modes. However, it is also possible to mount three separate screens to make all data screens available simultaneously.
FMS 200 Technical Characteristics:
- Aluminium front panel and case.
- Flight IGC data format recorder and logger on to USB key drive.
- Double USB key drives
- Can be fitted in rack or installed on its own orientable removable support.
- Screen type: Colour LCD.
- Screen size: 5.5 ”
- Screen area: 320 x 240 pixels.
- Visible area: 115 x 87 mm.
- Anti-reflection screen: Readable in full sunlight.
- Extremely compact: 6.5 cm deep.
- Total weight: 0.9 kg.
- Power: 11 - 14 volts, 0,9 A.
- Interface: GPS NMEA 0183 v2.0.
- Operating temperature range: –20 °C / +70 °C.
- Dimensions: 159 x 113 x 65 mm.
Moving Map Display
Through the acquisition of GPS data, the FMS 200 Moving Map GPS display provides a detailed electronic map, with the ability to set destinations, to zoom in on interesting areas, to record flight track to display navigation data calculated on the current destination (in the form of distance, direction, ETA, etc.). Alternatively, it is possible to view the map in full screen mode. This unit integrates several new functions, such as autopilot interface management.
- Real time GPS data.
- Autopilot function.
- CMAP vectorial mapping function.
- Multi scale zoom.
- Aeronautical, road and land marks.
- Jeppesen database.
- 200 user way points.
- 1000 point tracks record.
- 10 manageable routes.
- Routes and IGC compatible logger
- Output compatible with e.g. CompeGPS, Ozi Explorer and Avioportolano.
- Analogue direction finder (ADF).
- Adjustable units of measure.
- Custom map colours.
- Excellent visibility even in full sun light.
- Wide viewing angles.
- Check list and custom start up screen.
- Full screen mode function.
- 2 year warranty.
- 2 year free firmware upgrade directly from the internet.
Hardware required to utilise the GPS moving map:
You must have a FMS 200 view-finder and the optional GPS receiver.
EFIS Instrument Display (AIR DATA e AHRS)
A single button press allows the pilot to change from the Moving Map Screen to the EFIS instruments screen.
- Attitude indicator with a new high speed sensor (20 readings for 1 second).
- Roll indicator.
- Pitch indicator.
- Gyrocompass.
- Slip indicator.
- G-meter (with acceleration indication on three axis).
- 3 Altimeters.
- Variometer.
- Anemometer
Hardware required utilize the EFIS screen (AIR DATA e AHRS):
You must have the optional FMS BOX 16 or FMS BOX 32.
Screen for Engine Instruments (EIS)
This screen shows all engine and fuel functions. Simple, easy to read graphics – which look like a traditional survey system – allows the pilot to check all engine data at a glance. The data from the EIS display mode is always recorded along with other flight data information on the USB key drive.
- Tachometer.
- Timer.
- EGT.
- Carburetor temperature / airbox.
- TIT.
- Oil temperature.
- Oil pressure.
- MAP 1.
- MAP 2.
- FADEC interface.
- Rotor RPM.
- Fuel flow.
- Fuel level.
- Fuel pressure.
- Fuel consumed.
- Cylinder head temperature.
- Exhaust gas temperature.
- Turbine inlet temperature.
- Volts.
- Outside air temperature.
- Manifold pressure (dual).
- Compatibility with the most widespread probes already installed in your engine.
- Possibility of parallel connection with instruments already installed.
Hardware required to utilise the EIS screen:
You must have the optional FMS BOX 16 or FMS BOX 32.